Pressure Washer Honda

Portable Self Contained Cold Water Pressure Washer


Portable Self Contained Cold Water Pressure Washer
Portable Self Contained Cold Water Pressure Washer
Portable Self Contained Cold Water Pressure Washer

Portable Self Contained Cold Water Pressure Washer  Portable Self Contained Cold Water Pressure Washer

MAGNUM Trailer Mounted Portable Cold Water Pressure Washer. This is a Brand New 2014 Model Cold Water Trailer Mounted High Pressure Belt Drive Washer. Great Starter Unit for Car Detailers or House Washers!

They are designed for years of use. Axle Trailer w/ DOT Lighting 3500LB Axle, 2 Coupler, Swivel Jack, 2x10 Treated Wood Flooring. Belt driven Tri-plex oil bath pump. 0' R2 wire 5800psi high pressure hose. 5 Gallon Water tank plumbed with a 2 dump valve for quick draining.

Trailer Specifications: Image Shown has a lift gate on the trailer. Our Standard Unit does not have a gate. This will be an additional charge. Dimensions: 5' wide X 8' length. 2x10 Pressure Treated Wood Plank Flooring.

Technical assistance will be available to the purchaser of the unit. Cold Water, high pressure, gas powered, portable pressure washer. Nit has appropriate fully automatic safety controls. Unit conforms with CGA, CSA, &/or ETL Certification. Manufactured by an American Based Company and must conform to CETA Performance Standards and the Underwriters Laboratories standard for pressure washers - UL-1776.

All Hoses 3/8 ID double steel braid type exceeding SAE100R2 performance specifications. Quipped with a swivel and safety protection bend restricting collars. 5800 PSI at 250° F. Insulated pistol type safety shut off gun supplied shall be rated at 10 gpm, 5000 psi, and 300° F. Constructed from Fiberglass - reinforced polyester with brass and stainless steel valves and seats. A 48 single lance wand with side grab handle on wand for operator protection. Appropriate high pressure nozzles for single gun operation shall be supplied in 0° 15° 25° & 40° flat spray pattern plus a brass soap nozzle.

Belt drive system with cast iron bushed bore pulley, grip notch V-section size B belts, and adjustment plate for proper belt tension and alignment. All belts to be covered by safety machine cover.

Triplex, Ceramic plunger, oil bath crankcase type with forged brass head, mounted on a vibration isolation deck. Pump bypass loop shall be equipped with 145° thermal relief valve.

The pressure washer shall be equipped with a pressure trapped unloader valve suitable for single gun operation rated for a minimum of 8 gpm at 3900 psi. Unit mounted to a heavy 100% stainless steel - vibration isolation frame. Components to be located for ample service/inspection accessibility.

Quick couple connectors with stainless steel retainer ring & support balls. A high pressure safety relief valve shall be installed as a secondary safety device in the event an over pressurization condition occurs. This device shall be located at the outlet of the pump and shall be set at 3900 psi. Thanks for looking - please check back often as we are continually adding items. Images Are For Representation Purpose Only. Actual Product May Vary Slightly.
Portable Self Contained Cold Water Pressure Washer  Portable Self Contained Cold Water Pressure Washer