Pressure Washer Pump Max 4000 PSI 4.2 GPM, 1 Shaft Horizontal Gas Power Washer

  
Renew Your Gas Pressure Washer? - Quality triplex pressure washer pump with big save.

Service your residential and light commercial pressure washing for driveway, decks, fences, sidewalks, vehicles, and more. OEM Quality Power Washer Pump?

- Fully anodized black crankcase with solid brass pump head can greatly improve the strength and improve the service life. The triplex design can make the pump run more smoothly, powerful and durable. Sight glass and advanced oil seal technology eliminates the need for a dipstick. - This pump come with unloader could adjust your pressure output with best perfomance with your engine and best cleaning efficient for your workshop.

Also could reduce pressure when you need engine switch to idle model for low noise and relax for a while. - Pump flange comply with industry SAE standard mounting dimension, 1 shaft hole.

Diagonal distance between holes is 6 1/2''. Distance between short side holes is 3 1/4''. Distance between long side holes is 4 1/2''.

Come with 3/4" garden hose inlet and 3/8" quick connect output for easy set up and renew your power washer. Fit most engine with 9-15HP or 270-340cc, test performance and replacement pump for Honda engine such as GX340 GX390 GX270, Generac, Briggs&Strattton, Simpson. - The sight glass helps you check the oil level easily, you can know oil levels are low or if water has clouded the oil. We recommend you to change oil every 60 hours running time. Note: This pressure washer pump only for COLD WATER use!

We will get back to you within 12 hours. Great horizontal pressure washer pump for most. 1 inch Shaft Power Washer. Honda GX270 GX340 GX390 Engine. Compatible with models such as. PowerShot 40224, 40225, 40226, PS3835, PS60869, PS60918.

RKV3G27, RKV3G34, RKV4G36, RKV3G39, RSV4G40. ONLY for COLD WATER Use. Some tips for choosing the right replacement pump.

Horizontal Engine : The pump is installed horizontally onto the engine. VerticalEngine : The pump is installed vertically below the engine. Match your machine's PSI And GPM. Engine power and pump performance need to be matched for optimal machine performance.

Match the Engine Shaft Diameter. The shaft diameter for horizontal pumps is either 3/4 inches or 1 inch. Please refer to the engine specifications to confirm.

Match Current Pump Outlet Connection. This will ensure that your attachments are compatible with the new pump. If the connection does not match, you may need to use adapters or modify the setup.